Ordering data for S120 Combi spare/replacement parts
An overview of the available S120 Combi spare parts is provided in the table below:
Component Article number
S120 Combi front cover 6SL3161-3GP00-0AA0
S120 Combi guide frame for DRIVE-CLiQ cables 6SL3161-3EP00-0AA0
S120 Combi DC link lateral cover 6SL3161-3AP00-0AA0
S120 Combi internal fan with holder and data sheet 6SL3161-0JP00-0AA0
S120 Combi external fan module 6SL3161-0EP00-0AA0
S120 Combi drip protection
For the S120 Combi with 4 axes, this is provided in the pack of accessories
when shipped from the factory; for all other S120 Combi versions this must
be ordered and retrofitted.
6SL3161-3DP00-0AA0
S120 Combi set of connecting terminals /Terminal Kit
● 24 V plug connector
● Terminal for the motor holding brake
● 4 DRIVE-CLiQ blanking covers
● 2 terminals (4-pole) for X12/X13
● 2 terminals (4-pole) for X21/X22
● 5 shield connecting terminals for motor cables
● Shield connection terminal for EP signal cables
6SL3161-8AP00-0AA0
Spare parts and accessories - MCP USB
Qty. Description Article number
1 Feed/rapid traverse override rotary switch 6FC5347-0AF11-0AA0
1 Spindle/rapid traverse override rotary switch 6FC5347-0AF11-1AA0
Ordering address
You can find accessories and spare parts for the components in the Internet at: Siemens
Spares on Web (https://www.sow.siemens.com/?lang=en)
Spare parts and accessories
Software and hardware
238 Service Manual, 08/2018, 6FC5397-5DP40-6BA1
To Next Page
Loading...
Need help?
General
