Service cases - software
3.1 Backing up user data
Hardware and Software
26 Service Manual, 03/2011, 6FC5397-5DP40-0BA0
3. Using the arrow key, select the menu item "Reload saved user data".
4. Confirm that the backup is loaded by pressing the key <INPUT>.
5. Confirm the confirmation prompt by pressing the <INPUT> key.
Are you sure you want to reload saved user data?"
Note
Booting
If data is lost from the buffer memory, the data saved in the permanent memory will
automatically be reloaded to the memory at POWER ON.
If the control boots with the backed-up data, the following message is displayed:
"4062 Data backup copy has been loaded".
To Next Page
Loading...
