Service cases - software
3.7 Enter the final end user data (EUNA)
Hardware and Software
68 Service Manual, 03/2011, 6FC5397-5DP40-0BA0
3.7.3 This is how you save the machine identity
Saving the machine identity
Note
Ensure that the machine identity that has been entered is correct before saving in order that
no incorrect information is saved.
In order to save the machine identity (address data, version data and logbook) externally on
a data carrier, proceed as follows:
1. Select the "Diagnostics" operating area using the following key:
2. Press the "Version" softkey.
3. Press the "Save" softkey.
The "Save version information: Select Archive" window opens. Select a directory.
4. Press the "OK" softkey.
To Next Page
Loading...
