Siemens SINUMERIK 840D sl - Page 111

3
08/2005 Machining the Workpiece
3.11 Simulatin
g
machinin
g
3
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition 3-111
Stop simulation
 Press the "Stop" softkey.
Simulation is stopped.
Aborting simulation
 Press the "Reset" softkey.
Simulation is aborted and the unmachined blank shape of the
workpiece is displayed again.
Resuming simulation
 Press "Start" softkey.
Simulation is resumed.
End simulation
End
 Press the "End" softkey.
The machining plan or programming graphic for the program is
displayed again.