Siemens SINUMERIK 840D sl Operation/Programming

8
Tool Management 08/2005
8.3 Sortin
g
tools
8
♥ Siemens AG, 2005. All rights reserved
8-364 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
8.3 Sorting tools
When you are working with large magazines or several magazines, it
is useful to display the tools sorted according to different criteria. Then
you will be able to find a specific tool more easily in the lists.
-or-
 Select the "Tool list" or “Tool wear” softkey in the "Tools WOs"
operating section.
Sort
>
 Press the "Sort" softkey.
To
magazine
-or-
To name
-or-
To type
-or-
To
T-number
 Activate one of the softkeys to choose the sort criteria.
The tools are listed in the new order.
8.4 Deleting tools from the tool list
Tools that are no longer in use can be deleted from the tool list for a
clearer overview.
 Select the "Tool list" softkey in the "Tools WOs" operating area.
 Place the cursor on the tool that you would like to delete.
Delete tool
Delete
 Press the "Delete tool" softkey.
 Press the "Delete" softkey.
The tool data of the selected tool is deleted and the magazine location
is enabled again.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based