Siemens SINUMERIK 840D sl Operation/Programming

9
Program Management 08/2005
9.1 Mana
g
in
g
p
ro
g
rams with Sho
p
Turn
9
♥ Siemens AG, 2005. All rights reserved
9-374 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
9.1 Managing programs with ShopTurn
All the programs for workpiece machining that you have created in
ShopTurn are stored in the NCK-working memory.
You can access these programs at any time via the Program Manager
for execution, editing, copying, or renaming. Programs that you no
longer require can be deleted to release their storage space.
For exchanging programs and data with other workstations, ShopTurn
provides you with various options:
 Own hard disk (PCU 50.3 only)
 Compact Flash Card
 Disk-drive (PCU 50.3 only)
 USB network connection
The following sections explain either the program management of
ShopTurn on NCU (HMI Embedded) or the PCU 50.3 (HMI
Advanced).
Find out which version of ShopTurn you are running and then read
either section "Managing Programs with ShopTurn on NCU (HMI
Embedded)" or "Managing Programs with PCU 50.3".

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based