Siemens SINUMERIK 840D sl Operation/Programming

9
08/2005 Program Management
9.2 Mana
g
in
g
p
ro
g
rams with Sho
p
Turn on NCU
(
HMI Embedded
)
9
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition 9-381
9.2.5 Marking several programs
You can select several programs individually or in a block for
subsequent copying, deleting, etc.
Selecting several
programs as a block
 Open the Program Manager.
 Place the cursor on the first program that you want to select.
Mark
 Press the "Mark" softkey.
-or-
 Expand the program selection area by pressing the cursor up or
down key.
The entire block of programs is marked.
Selecting several
programs individually
 Open the Program Manager.
 Place the cursor on the first program that you want to select.
 Press the "Select" key.
-or-
 Move the cursor to the next program that you want to select.
 Press the "Select" key again.
The individually selected programs are marked.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based