Siemens SINUMERIK 840D sl - Page 410

11
Examples 08/2005
11.1 Standard machinin
g
p
rocesses
11
♥ Siemens AG, 2005. All rights reserved
11-410 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
 Press the
softkey
4. Input of blank contour with
contour computer
 Press the
New
contour
softkeys
 Contour name (here: Input Cont_1)
 Press the
softkey
 Determine the starting point of the contour:
X
60 abs
Z
0 abs
 Press the
softkey
 Input the following contour elements and confirm each with the
softkey:
1.
Z -40 abs
2.
X 80 abs Z -45 abs
3.
Z -65 abs
4.
X 90 abs Z -70 abs
5.
Z -95 abs
6.
X 0 abs
7.
Z 0 abs
8.
X 60 abs Z 0 abs
 Press the
softkey