Siemens SINUMERIK 840Di sl - Page 458

Tables
12.1 List of statements
Fundamentals
458 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
ORIWKS
1,6
Tool orientation in the workpiece
coordinate system
m 25
OS Oscillation on/off Integer,
without sign
OSB Oscillating: Start point m
OSC
6
Continuous tool orientation smoothing m 34
OSCILL Axis assignment for
oscillation-
activate oscillation
Axis: 1 - 3
infeed axes
m
OSCTRL Oscillation control options Integer,
without sign
m
OSD
6
Rounding of tool orientation by specifying
rounding length with SD
Block-internal m 34
OSE Oscillating: End point m
OSNSC Oscillating: Number of
spark-out cycles
(oscillating: number spark-
out cycles)
m
OSOF
1,6
Tool-orientation smoothing OFF m 34
OSP1 Oscillating: Left reversal
point
(oscillating: position 1)
Real m
OSP2 Oscillating: Right reversal
point
(oscillating: position 2)
Real m
OSS
6
Tool-orientation smoothing at end of block m 34
OSSE
6
Tool-orientation smoothing at start and
end of block
m 34
OST
6
Rounding of tool orientation by specifying
angle tolerance in degrees with SD
(maximum deviation from programmed
orientation characteristic)
Block-internal m 34
OST1 Oscillating: Stopping point
in left reversal point
Real m
OST2 Oscillating: Stopping point
in right reversal point
Real m
OVR Speed override 1, ..., 200% m
OVRA Axial speed override 1, ..., 200% m
P Number of subprogram
cycles
1, ..., 9999,
integers w/o
signs
e.g., L781 P...
; separate block