Siemens SIPROTEC 5 V8.83 User Manual

Plug-In Modules
Fasteners
The fasteners of the plug-in modules are shown in the following figure regarding the example of an installed
module and an empty, covered slot.
[le_fxing_elements, 1, --_--]
Figure 5-11 Fasteners
(1) EMC spring contact
(2) Fastening screw
(3) Cut-out for prying out the modules
(4) Plug-in module
(5) Fastening screw
(6) Cover plate
Installation
i
i
NOTE
Reordered modules are not contained in the original device configuration. Use DIGSI to perform the corre-
sponding extension in the Hardware and Protocols Editor.
Preparing Installation
!
DANGER
Danger due to live voltage when installing the plug-in modules.
Noncompliance with the safety notes will result in death or severe injuries.
²
Install plug-in modules on the electrically deactivated device only.
5.3
5.3.1
5.3.2
Working on the Device
5.3 Plug-In Modules
SIPROTEC 5, Hardware Description, Manual 197
C53000-G5040-C002-M, Edition 12.2021

Siemens SIPROTEC 5 V8.83 Specifications

General

Brand	Siemens
Model	SIPROTEC 5 V8.83
Category	Power distribution unit
Language	English