Siemens SIPROTEC 5 V8.83 User Manual

Group Accessories
Terminal Type A current terminal, 3 x protection and 1 x measurement
(for modular devices)
Terminal Type A current terminal, 4 x measurement
(for modular devices)
Terminal Type B current terminal, 4 x protection
(for non-modular devices)
Terminal Type B current terminal, 3 x protection and 1 x measurement
(for non-modular devices)
Terminal 2-pole cross connector for current terminal
Terminal
Terminals for IO110, IO112, IO113
35
Terminal
Terminals and shielding for IO111
35
,
36
,
37
Terminal
Terminal set only for IO23x
35
Terminal 2-pole cross connector for voltage terminal
Terminal Cover for current terminal block
Terminal Cover for voltage terminal block
Terminal Transport safety, current terminal
Terminal Transport safety, voltage terminal
Terminal Terminal set for direct connection to 400 V low voltage
Accessories USB covers (10 each for CP 100, 150, 200, 300)
Accessories Cable, integrated operation panel, 0.43 m
Accessories Cable, detached operation panel, 2.50 m
Accessories Cable, detached operation panel, 5.00 m
Accessories Cable set, COM link cable
Accessories Cover plate for plug-in modules
Accessories Cover panel 1/6, 5 pcs
Accessories Set of angle rails
Accessories 10 x labeling strip, LEDs/function keys
Accessories 5 x labeling strips, push-buttons
Accessories Set of parts, mounting bracket 1/2
Accessories Set of parts, mounting bracket 2/3
Accessories Set of parts, mounting bracket 5/6
Accessories Set of parts, mounting bracket 1/1
Accessories 4 x screw cover 1/3, type C11
Accessories 4 x screw cover 1/3, type C22
Accessories 4 x screw cover 1/6, type C21
Accessories 2 x bus termination plate
Accessories Assembly frame for panel surface mounting for non-modular
devices 7xx81 and 7xx82 devices
Accessories SDHC memory card for 7KE85
Accessories 10 x battery holder
Accessories Connecting cable for 2nd row
Accessories DIGSI 5 USB cable 2.0
Accessories SFP RJ45, 10 units
Accessories SFP Single-mode, 24 km, 10 units
Sensors for arc protection Point sensor with line length of 3 m
36
The set consists of terminals and shielding for the IO111 for the terminal positions M and N.
37
Only for non-modular devices 7xx82
Ordering Information
7.1 Ordering Spare Parts and Accessories
SIPROTEC 5, Hardware Description, Manual 281
C53000-G5040-C002-M, Edition 12.2021

Siemens SIPROTEC 5 V8.83 Specifications

General

Brand	Siemens
Model	SIPROTEC 5 V8.83
Category	Power distribution unit
Language	English