Mounting and maintenance
4.4 Removing
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
125
4. Lift the slider using a screwdriver.
5. Detach the basic unit from the lower edge of the standard mounting rail.
6. Remove the basic unit from the lower edge of the standard mounting rail.
7. If required, repeat steps 4 to 6 for each supplementary module.
The following applies to BUF8600 buffer modules:
After disconnecting from the supply, the device takes 30 minutes before it is safely
discharged.
To Next Page
Loading...
