Siemens SITOP PSU8600 - Firmware Update; Reset to Factory Settings

Engineering and remote access
7.5 SIMATIC STEP 7
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
199
7.4.8
Firmware update
The firmware update process is described in detail in the "Firmware update readme", which
is provided with the firmware update download package. Please follow the instructions
provided there very carefully. The files for updating the firmware are available online at:
(https://support.industry.siemens.com/cs/ww/en/view/102295547
)
7.4.9
Reset to factory settings
A reset to the factory settings deletes all hardware and software configurations stored in the
SITOP PSU8600 and restores the factory settings.
This influences, for example:
● IP address
● Device name
● Parameter values for the SITOP PSU8600 and assigned supplementary modules
Proceed as follows to reset the SITOP PSU8600 to the factory settings:
1. Select SITOP PSU8600 in the Network view and change to the Device view.
2. Click on "Go online".
3. In the SITOP PSU8600 shortcut menu, select "Online & diagnostics".
4. In the "Functions" folder, select the "Reset to factory settings" group.
5. Click on the "Reset" button.
6. Respond to the confirmation prompt with "OK".