Siemens SITOP PSU8600 - OPC UA Server

Engineering and remote access
7.7 Web server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
289
●
Permit access only with HTTPS
Define whether access is only permissible with HTTPS.
●
Download certificate
To download the certificate for the encrypted connection via HTTPS, click on "Download
certificate".
●
Log off automatically after 15 minutes
Define whether a user should be automatically logged off after closing the web server.
●
Update interval
Define the interval in which the actual values are sent to the web server.
See also
Loading the configuration (commissioning) (Page 277)
7.7.7.4
OPC UA server
Configure the OPC UA server here.
Settings
General
●
OPC UA server activated
Define as to whether device can be accessed via the OPC UA interface. If the option is
activated, then the SITOP PSU8600 acts as OPC UA server.
●
Unencrypted access activated
If the option is activated, then unencrypted access via the OPC UA client is possible.
Activating the option is not recommended.
●
OPC UA server port
The preset port number is 4840. You can enter another port number.