Siemens SITOP PSU8600 - Lock; Methodset

Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
323
7.8.6.9
Lock
Display name
Data type
Definition
Description
BreakLock
1)
Method
-
ExitLock
Method
-
Lock for write access is withdrawn
InitLock
Method
-
Locks write access for other users
Locked Boolean PropertyType Inhibited
LockingClient
Method
-
IP address of the locking user
LockingUser
Method
-
User that had locked
RemainingLockingTime
Method
-
Remaining time to the inhibit
RenewLock Method - Renew lock in order to prevent the
lock from expiring
1)
Method is not supported.
7.8.6.10
MethodSet
Display name
Data type
Definition
Description
AddUser
Method
-
Add new user
ClearAlarmHistory
Method
-
Delete alarm history
ChangeUserPassword Method - Change password of the actual
user
DeleteUser
Method
-
Delete user
DownloadDeviceConfiguration Method - Save parameters of the active
device as file
ManToRemote Method - Change MANUAL values into
REMOTE values
RemoteReset Method - Initiate restart or shutdown of the
SITOP PSU8600 with
SITOP Manager
ResetOutputs
Method
-
Reset all outputs
ResetSystem
Method
-
Reset system
ResetToFactorySettings
Method
-
Reset to factory settings
SaveDeviceConfiguraton Method - Permanently save actual configura-
tion
SetNetworkParameter Method - If this option is activated (default
setting), then the PROFINET de-
vice name is assigned to the de-
vice and this cannot be edited. The
PROFINET device name can only
be changed under "General" in the
device properties.
If the option is not activated, then
the PROFINET device name can
be set independent of the device
names.
ShowAlarmHistory
Method
-
Display alarm history.