Siemens SITOP PSU8600 - Actualbufferstate; Actualstate

Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
315
7.8.6.1
ActualBufferState
Display name
Data type
Definition
Description
BufferChargingState
Byte
AnalogItemType
System charge status
BufferReady
Boolean
PropertyType
Sufficient buffer readiness
BufferingDisabledByInput Boolean PropertyType Buffer component disabled via
control contact
BufferChargingPower Byte AnalogItemType Actual charging power UPS mo-
dule(s)
7.8.6.2
ActualState
Display name
Data type
Definition
Description
DeviceInputVoltage
Float
AnalogItemType
Input voltage
DeviceMaxOutputCurrent
Float
AnalogItemType
Maximum system output current
DeviceOperationMode Byte MultiStateDiscrete-
Type
Operating mode:
MANUAL / REMOTE
DeviceOperationModeLed Object
1)
Sitop_8600_LedType Status of the LED MANUAL operat-
ing mode:
MANUAL/REMOTE operating
mode
DeviceOutputCurrent
Float
AnalogItemType
System load current.
DeviceOutputVoltageOK
Boolean
PropertyType
Status of contact "O.K."
DeviceP1LinkLed
Object
1)
Sitop_8600_LedType
Status of LED P1
DeviceP2LinkLed
Object
1)
Sitop_8600_LedType
Status of LED P2
DeviceRunLed
Object
1)
Sitop_8600_LedType
Status of LED "RUN"
DeviceSFLed
Object
1)
Sitop_8600_LedType
Status of LED "SF"
DeviceSoftOutputCharacteristic Object
1)
Sitop_8600_LedType Soft output characteristic
DeviceState Byte MultiStateDiscrete-
Type
Operating state
DeviceStateLed Object
1)
Sitop_8600_LedType Status of LED "O.K.": Device status
DeviceUzkVoltage
Float
AnalogItemType
Internal supply voltage
1)
with variables "Colour" and "State"