Siemens SITOP PSU8600 - Diagnostics

Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
197
2. In the shortcut menu, in submenu "Download to device", select option "Hardware
configuration".
The project data are compiled. The "Load" button is activated as soon as loading is
possible.
3. Click on "Load".
Data is loaded. The "Result of the load operation" dialog window is opened. In this dialog,
you can check whether the load task was successful and select any further actions.
4. Click on the "Finish" button.
The selected project data have been loaded to the SITOP PSU8600 via the IO controller.
7.4.7
Diagnostics
The following data can be retrieved using the online and diagnostics function:
Navigation area
Value
General Module
Short designation
Order number
Hardware
Firmware
Module information
Device name
Module name
Plant designation
Location ID
Manufacturer information
Description of manufacturer
Serial number
Copyright entry
Profile
Profile details
Diagnostic status
Status
List of detailed information
Default diagnostics
List of detailed information
PROFINET interface Ethernet address/
network connection
MAC address
Ethernet address/
IP parameter
IP address
Subnet mask
Default router
IP settings
IP setting time
Ports
List of ports
Functions Assign an IP address MAC address
IP address
Subnet mask
Router address