Siemens SITOP PSU8600 - NTP Client; PROFINET Security

Engineering and remote access
7.7 Web server
Power supply system SITOP PSU8600
290 Manual, 09.2018, A5E36758446-5-76
7.7.7.5
NTP client
Configure the NTP client for time synchronization under "HW Configuration > General > NTP
client".
Figure 7-1 Screenshot - NTP client
If the NTP client is activated, then the local time is synchronized with the specified time of
the specified NTP server.
The NTP update interval is automatically and dynamically adapted between 64 seconds and
68 minutes 16 seconds.
● NTP client activated
Here, activate the NTP client.
● NTP server address 1 … 4
Enter up to 4 IP addresses from NTP servers.
7.7.7.6
PROFINET security
Settings