Siemens SITOP PSU8600 - Page 198

Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
Power supply system SITOP PSU8600
198 Manual, 09.2018, A5E36758446-5-76
Navigation area
Value
Firmware update / PSU8600
Order number
Firmware
Name
Rack
Slot
Firmware file
Firmware version
Suitable for modules with
Status
Assign name
PROFINET device name
Type
Reset to factory settings
MAC address
IP address
PROFINET device name
Retrieve the online and diagnostics data of SITOP PSU8600
Proceed as follows to start the online and diagnostics view for a specific module:
Project tree
:
1. Open the device folder of the SITOP PSU8600 in the Project tree.
2. Double-click on "Online & diagnostics".
or
Select the device folder of the SITOP PSU8600 in the Project tree.
3. In the shortcut menu or in the "Online" main menu, select the "Online & diagnostics"
command.
Device view:
1. Open the Device view of the Device configuration.
2. Select the SITOP PSU8600.
3. In the shortcut menu or in the "Online" main menu, select the "Online & diagnostics"
command.
Network view:
1. Open the Network view of the Device configuration.
2. Select the SITOP PSU8600.
3. In the shortcut menu or in the "Online" main menu, select the "Online & diagnostics"
command.
4. Click on "Connect online".
The information is displayed under "Diagnostics / General".