Siemens SITOP PSU8600 - Page 18

Description, device design, dimension drawing
2.1 Description of the basic devices
Power supply system SITOP PSU8600
18 Manual, 09.2018, A5E36758446-5-76
①
AC input
②
DC output
③
0
Volt terminal
④
Signaling contact, remote reset
⑤
Ethernet/PROFINET interface
⑥
LEDs ("O.K.",, "MAN",, "SF",, "RUN",, "P1",, "P2")
⑦
Mounting rail slider
⑧
Convection
⑨
Clearance above/below
⑩
Socket at the upper side of
the device for the plug connection to optional
supplementary modules
⑪
Buttons of the outputs
with LED display "ON/OFF/RST"
⑫
Voltage potentiometer U
(V)
⑬
Current potentiometer I
(A)
from
⑭
DIP switch, special functions