Engineering and remote access
7.5 SIMATIC STEP 7
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
207
● SIMATIC STEP 7 is opened and a project with an IO controller is created.
● A SITOP PSU8600 basic unit has been integrated in the project.
1. In the graphic editor, select the hardware configuration of the basic unit to display the
PSU8600 station window.
2. Navigate in the hardware catalog to the buffer modules under
"PROFINET IO\I/O\PSU8600\PSU8600\[inserted PSU8600]\BUF8600".
3. Select the required buffer module in the Hardware catalog.
To Next Page
Loading...
