Engineering and remote access
7.5 SIMATIC STEP 7
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
209
1. In the graphic editor, select the hardware configuration of the basic unit to display the
PSU8600 station window.
2. Navigate in the hardware catalog to the UPS modules under
"PROFINET IO\I/O\PSU8600\PSU8600\[inserted PSU8600]\UPS8600".
3. Select the required UPS module in the Hardware catalog.
4. Drag the UPS module and drop it into the required slot in the station window.
Alternatively, the UPS module can also be added by double-clicking on the entry in the
Hardware catalog.
The UPS module is inserted into the selected slot.
To Next Page
Loading...
