Engineering and remote access
7.6 Cyclic and acyclic data
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
239
Writing Adjustable PROFIenergy parameters of
36 bytes
49 0 1 PROFIenergy channel
list
Reading /
writing
PROFIenergy pause configuration of
the power supply system (outputs,
which are switched off during a
8 bytes
53 0 1 Web server values Reading Web server settings of the
6 bytes
Writing Adjustable parameters for the web
server of the SITOP PSU8600.
6 bytes
54 0 1 OPC-UA values Reading OPC UA settings of the
4 bytes
Writing Adjustable parameters for the OPC UA
interface of the SITOP PSU8600.
4 bytes
55 0 1 NTP client settings
Setting for connection to NTP servers
Writing Adjustable parameters for connecting
66 bytes
56 0 1 NTP client status Reading Time of the last synchronization
Time of the next synchronization
40 bytes
57 0 1 PN security enhance-
ment
Setting for DCP write protection
Writing Activates/deactivates DCP write protec-
tion
2 bytes
You can find detailed information about the individual data sets in Section "Data sets SITOP
PSU8600 (Page 242)".
Reading and writing data sets SITOP CNX8600
6EP4436-8XB00-0CY0 and 6EP4437-8XB00-0CY0
1 1-6 2 Channel1 Reading Configuring output 1 of the
expansion module SITOP CNX8600.
10 bytes
Writing Adjustable parameters for output 1 of the
expansion module SITOP CNX8600
10 bytes
1 1-6 3 Channel2 Reading Configuring output 2 of the
expansion module SITOP CNX8600.
10 bytes
Writing Adjustable parameters for output 2 of the
expansion module SITOP CNX8600
10 bytes
1 1-6 4 Channel3 Reading Configuring output 3 of the
expansion module SITOP CNX8600.
10 bytes
Writing Adjustable parameters for output 3 of the
expansion module SITOP CNX8600
10 bytes
1 1-6 5 Channel4 Reading Configuring output 4 of the
expansion module SITOP CNX8600.
10 bytes
Writing Adjustable parameters for output 4 of the
expansion module SITOP CNX8600
10 bytes
To Next Page
Loading...
