Siemens SITOP PSU8600 - Page 330

Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
330 Manual, 09.2018, A5E36758446-5-76
Display name
Data type
Definition
Description
Alarm_F_UzkHigh Boolean Sitop_8600_AlarmType Voltage of the internal supply is too
high. All outputs of the power sup-
ply system have been switched off.
AlarmF_WrongChecksum Boolean Sitop_8600_AlarmType Defective firmware detected. De-
vice must be reactivated with a
new firmware update.
Alarm_MD_General Boolean Sitop_8600_AlarmType General critical error occurred. The
device may therefore behave in-
consistently.
Alarm_MD_LessCapableModule
Detected
Boolean Sitop_8600_AlarmType A module with reduced power was
detected. Deviating system behav-
ior may be possible.
Alarm_MD_ModuleParameters
Corrupt
Boolean Sitop_8600_AlarmType Stored module configuration is
corrupt. Deviating module behavior
may be possible.
Alarm_MD_Overtemperature Boolean Sitop_8600_AlarmType Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
Alarm_MD_OvertemperatureMo-
dule
Boolean Sitop_8600_AlarmType Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
Alarm_MR_BufferStateBuffering Boolean Sitop_8600_AlarmType The power supply system is sup-
plied via the buffer expansion
module(s).
Alarm_MR_General Boolean Sitop_8600_AlarmType General error occurred. Device
behavior remains consistent, how-
ever.
Alarm_MR_ModuleParameters
Corrupt
Boolean Sitop_8600_AlarmType Stored module configuration is
corrupt. Module behavior remains
consistent, however.
Alarm_MR_MoreCapableModule
Detected
Boolean Sitop_8600_AlarmType A module with excessive power
was detected. Normal operation of
the system is possible.
Alarm_MR_NewModuleDetected
Boolean
Sitop_8600_AlarmType
New unconfigured module detected
Alarm_MR_SerialNumberDiverge
Boolean
Sitop_8600_AlarmType
Different serial number detected
Alarm_MR_UnexpectedModule
Detected
Boolean Sitop_8600_AlarmType Unexpected module type detected.
Alarm_N_BufferStateFull Boolean Sitop_8600_AlarmType Ready for buffering. Energy stor-
age fully charged.
Alarm_N_BufferStateNotFull Boolean Sitop_8600_AlarmType Restricted buffer capacity. Energy
storage not fully charged.
Alarm_N_BufferStateNotReady Boolean Sitop_8600_AlarmType No buffer capacity. Energy storage
not sufficiently charged.
Alarm_N_SoftwareDownload
Boolean
Sitop_8600_AlarmType
Firmware was downloaded
Alarm_N_SoftwareVersionDiverge Boolean Sitop_8600_AlarmType Different firmware version detect-
ed.