Siemens SITOP PSU8600 - Page 81

Operator control at the device
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
81
Operating the UPS module
All operator controls are located at the front.
① … ⑥
DIP switch, special functions
⑦ … ⑫
DIP switch TIMER
Note
Settings at the UPS module using DIP switches
① to ⑫ are only accepted in the MANUAL
mode, see Chapter "
MANUAL and REMOTE operating modes (Page 88)". These operator
controls are deactivated in the REMOTE mode.