Siemens SITRANS FS230 - Page 43

4. Connect downstream sensor cable ② from transmitter port (1B) and make connection snug.





① Wall mounted transmitter ③ Flow direction
② Path 1 - Downstream sensor cable to
transmitter port (1B)
④ Path 1 - Upstream sensor cable to internal DSL port
(1A)
  ⑤ Hi Precision mounted sensors
Figure4-3 Hi Precision Re󹪞ect mount single enclosure wiring
5. Tighten all cable glands to obtain optimum sealing.
Connecting
4.4HI Precision mount FST030
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF 43