Siemens SITRANS FS230 - Page 45

4. Connect downstream sensor cable ② from transmitter port (1B) and make connection snug.
/WQ





① Wall mounted transmitter ③ Flow direction
② Path 1 - Downstream sensor cable to
transmitter port (1B)
④ Ltn (spacing distance between sensors)
  ⑤ Path 1 - Upstream sensor cable to internal DSL port (1A)
Figure4-4 HI Precision Direct mount Dual enclosure sensor wiring
5. Tighten all cable glands to obtain optimum sealing.
6. Refer to transmitter FST030 Operating Instructions to program transmitter.
Connecting
4.4HI Precision mount FST030
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF 45