A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 53
mmmmm
Commissioning
End of QS Flow Wizard
For QS to be successful, all changes must be applied.
To transfer Quick Start values to the device and return to Program menu, press
DOWN arrow (Finish). Then press LEFT arrow three times to return to
Measurement mode.
Options
BACK, CANCEL, FINISH (Display returns to 1.1.1 Quick Start menu when Quick
Start is successfully completed or cancelled. If CANCEL is selected, no
changes are written to the device.)
Note: It is strongly recommended that an
Auto Zero Head
be performed after
completion of the wizard to ensure best accuracy. See
2.15.2. Auto Zero Head
on
page 191.
To Next Page
Loading...
