Page 168 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS A5E33329501
mmmmm
Parameters
2.8.8.2. Assigned Relay
Determines which relay (if any) will be activated when the Fail-safe Alarm
activates.
2.8.8.3. Alarm State
Read only. Use to view the current state of the Fail-safe Alarm.
2.8.9. High Flowrate Alarm
Available only on LUT440 (OCM model).
Reported when the OCM flowrate is within a user-defined range (see
2.8.9.2.High Flowrate Value ON
and
2.8.9.3.High Flowrate Value OFF
).
2.8.9.1. Enable
Enables/disables High Flowrate Alarm.
2.8.9.2. High Flowrate Value ON
Sets the flowrate value (defined in 2.15.3.7.Flowrate Units) at which the
High Flowrate Alarm will activate.
2.8.9.3. High Flowrate Value OFF
Sets the material level (defined in 2.15.3.7.Flowrate Units) at which the High
Flowrate Alarm will de-activate.
2.8.9.4. Assigned Relay
Determines which relay (if any) will be activated when the High Flowrate
Alarm activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Options
ACTIVE
INACTIVE
Options
ENABLED
* DISABLED
Values
Range: 0 to 9999999
Default: 0
Values
Range: 0 to 9999999
Default: 0
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
To Next Page
Loading...
