Siemens SITRANS LUT400 Series - Page 487

Page 174 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS A5E33329501
mmmmm
Parameters
2.10.2. Process Value Log
2.10.2.1. Enable
Enables/disables Process Value (PV) Logging.
2.10.2.2. Process Values Log Rate
Sets Process Value (PV) Logging rate in minutes.
2.10.3. Alarm Log
2.10.3.1. Enable
Enables/disables Alarm Logging.
2.10.4. Flow Log
Available only on LUT430 (Pump and Flow model), and LUT440 (OCM model).
2.10.4.1. Flow Log Mode
Menu number
2.10.4.1. visible on LUT430 (Pump and Flow model).
OR
2.10.4.2. Flow Log Mode
Menu number
2.10.4.2. visible on LUT440 (OCM model).
Sets flow log mode.
2.10.4.3. Standard Flow Log Interval
Sets standard flow log interval in minutes, when 2.10.4.1.Flow Log Mode set
to a fixed or variable rate.
Options
ENABLED
*
DISABLED
Values
Range: 1 to 1440
Default: 1
Options
ENABLED
*
DISABLED
Note: Default settings in the parameter tables are indicated with an asterisk (*)
unless explicitly stated.
Options
*OFF
FIXED RATE
VARIABLE PERCENTAGE MAX FLOW / MIN
a
a.
Option available only for LUT440.
VARIABLE PERCENTAGE MAX FLOW
a
VARIABLE PERCENTAGE MAX HEAD
a
Values
Range: 1 to 1440
Default: 1