Siemens SIVACON 8PS - Page 174

Dimension drawings
8.3 Feeder units
SIVACON 8PS - Configuring with LX system
172 Configuration Manual, 10/2011, A5E02194899-02
System t [mm]
Connection tag
thickness
T4
1)
[mm]
For PEN (N)
T3
1)
[mm]
For L3
T2
1)
[mm]
For L2
T1
1)
[mm]
For L1
LXA(C)01.. 10 68.5 61.5 70.5 63.5
LXA(C)02.. 10 70.5 61.5 70.5 61.5
LXC03.. 16 62.5 55.5 70.5 63.5
LXC04.. 16 64.5 55.5 70.5 61.5
LXA04.. 10 70.5 55.5 70.5 61.5
LXC05.. 16 62.5 55.5 70.5 63.5
LXA05.. 16 64.5 55.5 70.5 61.5
LXA(C)06.. 16 62.5 55.5 70.5 63.5
LXA(C)07.. 16 64.5 55.5 70.5 61.5
LXA(C)08.. 16 64.5 55.5 70.5 61.5
LXA(C)09.. 16 62.5 55.5 70.5 63.5
LXA10.. 16 64.5 55.5 70.5 61.5
1)
Dimensioning between front edge of connection tag and outer edge of enclosure on
the L1 side (L1=phase L1). The dimensions apply for all phase sequences, that is,
also for the types +LX-.D, +LX-.E, LX-.F, +LX-.G and LX-.H