Siemens SOMATOM Manual&Nbsp;

Workflow Information
101
Setting the Emergency Protocol:
One protocol must be labeled as the emergency pro-
tocol, if you want to change the default emergency
protocol you have to select the desired protocol and
click onto the Emergency icon. An Application Restart
is necessary to set the new default emergency proto-
col.
The emergency protocol is displayed with the Emer-
gency icon in front of the protocol name. This protocol
can not be deleted.

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM