Scan and Reconstruction
19
Scan Set Up
Scans can be simply set up by selecting a predefined
examination protocol. To repeat any mode, just click
the chronicle with the right mouse button for repeat.
To delete it, select cut. Each range name in the chron-
icle can be easily changed before load.
Multiple ranges can be run either automatically with
auto range, which is denoted by a bracket connecting
the two ranges, or separately with a pause in
between.
Feed in/Feed out
The performance of the different buttons (soft but-
tons, gantry buttons, control box buttons) is standard-
ized as follows:
•in NOT loaded modes
•in loaded Biopsy mode:
1 mm
Feed In/Out = slice width x No. slice positions per scan
2
To Next Page
Loading...
