Siemens SOMATOM Manual&Nbsp;

132
Contrast Medium
After the injector is armed the scan and the injector
can be started by pressing either the Start button/
Footswitch at the scanner, or the Start button at the
injector panel outside of the scan room or directly at
the injector inside the scan room.
Note: If the injector is not ready the scan cannot be
started. If both systems are ready to START and the
user disarms the injector, the bubble Check Injector is
shown again.

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM