Siemens SOMATOM Manual&Nbsp;

Spine
295
– SpineVol
Spiral mode for axial and sagittal lumbar and tho-
racic spine studies
– SpineSeq
Sequential mode for lumbar and thoracic evaluation
of the discs
– Osteo
Sequential mode used for the application syngo
Osteo CT
For SOMATOM Emotion 6-slice configuration:
– C-Spine
Spiral mode for cervical spine studies
– C-SpineVol
Spiral mode for axial, sagittal soft tissue and sagittal
bone studies for the cervical spine
– SpineRoutine
Spiral mode for routine lumbar and thoracic spine
studies
– SpineVol
Spiral mode for axial and sagittal lumbar and tho-
racic spine studies
– SpineThinSlice
Spiral mode for thin slice lumbar and thoracic spine
studies
– SpineSeq
Sequential mode for lumbar and thoracic evaluation
of the discs
– Osteo
Sequential mode used for the application syngo
Osteo CT

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM