Siemens SOMATOM Manual&Nbsp;

446
Specials
You can change
the following Scan
Parameters on the
examination task card
during radiation:
•Gantry Tilt
•Table position
•Table movement type
•Feed in/Feed out
Hints
• Press the footswitch either to position the needle or
to control the needle position.
• Without HandCARE every time you release the foot-
switch max. the last scanned 3 sec. of acquired
images are automatically saved to the local data-
base.
• With HandCARE every time you release the foot-
switch one image per rotation is automatically saved
to the local database.
• If CARE View is used, only the middle slice of the last
image is displayed after release of the footswitch.

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM