SIGLENT
42 SDM3045X Digital Multimeter
show the second selected function normally.
If math function (Statistics, Limits, Relative) is used in Main Display, when
opening Vice Display, the result will still be shown in Main Display and
Vice Display will show the second selected function normally.
3. If Temperature function is used in Main Display, set the display mode
( →【 Display】→【All】). Then the result (corresponding value) will
be shown in Main Display and the current measurement value is shown in
Vice Display.
4. Auto Range is adopted by Vice Display. If the same measurement function
is used in both the display, so does the range.
5. Measured data in Vice Display cannot be saved into “History”.
To Next Page
Loading...
