SIGLENT SDM3045X - Relative Value

SIGLENT
70 SDM3045X Digital Multimeter
Relative Value
Relative value is used for relative measurement. Actual measurement reading
is the depression between measurement value and preset value.
The Multimeter allows operating for the following parameters: DC Voltage, AC
Voltage, DC Current, AC Current, Resistance, Frequency, Period,
Capacitance and Temperature.
Press →【Rel Value】to enter the interface shown in the following
diagram.
Diagram 2- 62 Relative Operation
Table 2- 26 Rel Value Operation Function Menu
Function
Menu
Description
Value
Select current measurement value as preset value.
Off
Turn off the relative operation function.
When Rel Value function is turned on, the result of relative measurement will
show on the screen.
Main display = Measurement value – Preset value