SIGLENT SDM3045X - Trigger

SIGLENT
SDM3045X Digital Multimeter 77
Trigger
The Multimeter supports Trigger function. Press or on the front
panel to trigger the Multimeter by Auto or Single mode .Auto trigger is
considered as a default when the power is on.
Auto Trigger
Press on the front panel one time and Auto Trigger will be started to
capture continuous readings automatically. By the time, the black field of the
screen will show “● Auto Trigger”. Press again and the trigger is
stopped.
Single Trigger
Press on the front panel, Single Trigger will be started one time and
generate an effective reading. By the time, the black field of the screen will
show “● Single Trig”.
Explanation：
In Remote Mode, the black field just above the screen will show “● Immediate
Trig”. Press to switch back to the local mode and the Multimeter will
choose Auto Trigger automatically.