Sigma Digital SLR Camera SD14 - Page 30

29
TO REMOVE THE CF CARD
1
Set the “D”-Dial to the position.
• Make sure that the CF card busy light is off,
before continuing.
2
Slide the CF Card Cover until it pops open.
3
Press the Eject button to eject the CF card.
4
Close CF Card Cover and slide it in the
direction shown by the arrow until it clicks shut
CAUTION !!
• Never do any of the following while the CF Card busy light is on. (The CF
card busy light indicates when the camera is writing, reading, or erasing
images from the CF card. Doing any of the following may cause image data
to be lost or corrupted.)
1. Do not open the CF card cover or remove the CF card.
2. Do not open the battery cover or remove the battery.
3. Do not apply shocks or vibrations to the camera.
TIP
• If the “D”-Dial is set to the position while the CF Card busy light is on,
the camera will remain on until it is done processing images or accessing the
CF card.