87
DELETING A SINGLE IMAGE
TO DELETE A SINGLE IMAGE
1
Use the
arrows on the 4-way controller to
select the image to be deleted in Contact
Sheet or Single-Image View.
2
Press
to display the Delete Menu.
• “Current image” will be the default selection.
3
Press
to delete the image.
• If the image is unlocked, it will be deleted without any further confirmation.
• If the image is locked, a confirmation dialog will come up asking if you are sure
you want to delete the locked image. Press
to unlock and delete the image
or
to return to reviewing images without deleting.
TIP
• If the Delete Menu was opened from the Jump Mode, you cannot select
“Delete”. If the CF card contains a marked image,then “All Marked” is
selected. If the CF card does not contain marked image, then “All” is
selected.
To Next Page
Loading...
