38
When this symbol blinks, shutter speed may
be too slow and picture may be blurred. In this
case, please use a flash (P. 4 3 ) or use a tripod
to prevent blurring.
PROGRAM SHIFT
You can change the combination of shutter speed and aperture value, which
were automatically selected by the camera. While turning the “C”-Dial, the
combination of shutter speed and aperture value will change within the range of
combinations that give the equivalent exposure.
■ It will be canceled automatically, after taking the picture.
■ A program shift cannot be performed while using the flash.
To Next Page
Loading...
