73
TO CHANGE PREVIEW DURATION
1
Make sure the camera is turned on.
2
Press the
button on the back of the
camera to display the Camera Set-up Menu.
(See P.104)
3
Use the
arrows on the 4-way controller to
select “Quick Preview”.
4
Press the
arrow or
to open sub-menu.
5
Use the
arrows on the 4-way controller to
select duration.
6
Press the arrow or
to apply the setting
or the
arrow or
to close sub-menu
without making any changes.
TIP
• To manually turn off the Quick Preview image, press the button or the
shutter button half-way.
• While the Quick Preview image is being displayed, the button can be
used as a shortcut key to temporarily toggle the over-exposure warning
overlay on or off, or to mark, lock or rotate the image. (See P.98 to set OK
key shortcut.)
• It will not be possible to zoom in to the preview image, use the Modify Menu,
or change to another image while the Quick Preview is up.
• Pressing the button while the Quick Preview image is up enables all
image review features and overrides the Quick Preview time-out.
To Next Page
Loading...
