97
Managing SimpleShare Network
STATIC IP NETWORK SETUP
The Static LAN protocol option allows you to assign a fixed IP address to SimpleShare. Choosing this option provides
considerable flexibility, however, keep in mind that every computer on the network connecting to SimpleShare must also have
be configured with a static (fixed) IP address. To set the IP address for SimpleShare statically, complete the following steps:
1 Click the Networking menu.
2 From the LAN Protocol list, choose Static.
3 From the LAN IP Autoconfiguration list, choose
Disabled.
4 Set the following IP network addresses, as necessary, to
configure SimpleShare on your local network:
•
LAN IP Address
•
LAN Subnet Mask
•
LAN Default Gateway
•
LAN Domain Name
•
LAN DNS Servers (primary server and two alternates)
•
LAN WINS Servers (primary server and two alternates)
5 Click .
6 On the Apply screen, click .
Apply
Continue
To Next Page
Loading...
