74
Managing SimpleShare Disk Pool
8 In the confirmation dialog, click .
9 On the Create Disk Pool Result page, click
to view information on the
new disk pool or click to create a share in
the pool.
To avoid losing data, do not reset or power off the
SimpleShare server, or click any browser menus or buttons
while the disk pool is being created.
If SimpleShare displays a pop-up indicating that all columns
should add up to the same disk space, space allocation for
each disk is not set properly. Make sure only a single
checkbox in each Stripe n column is selected and that the
total space allocated for all disks in a stripe is the same for
each stripe.
OK
Continue to Disk Management
Create Share
To Next Page
Loading...
