Simplex 4010 - Using Truetest

C-8
Use Steps 1 through 5 and Figures C-5 to activate TrueTest.
1. Press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [TrueTest] is displayed and then
press <ENTER>.
3. Press < > or < > to move the focus brackets to the desired option.
4. Press <NEXT> or <PREVIOUS> to enable the options shown in the figure
below.
5. Once all options are set, press <ENTER> to activate TrueTest.
Figure C-5. TrueTest Options
Figure C-6 shows an example of the TrueTest screen with the default values.
Figure C-6. TrueTest Screen
TrueTest, Continued
Using TrueTest
Walk Test
• On/Off
• Log/NoLog
• Print/NoPrint
• DACT/NoDACT
• NoCTRL/CTRL
Top Level Menus
TrueTest Quick CFIG
<ENTER> to Accept <ARROW KEYS> to Change
[Off] Log Print NoDACT NoCTRL
Focus Brackets
Technical Manuals Online! - http://www.tech-man.com