4100U-S1 Programming Guide Document: LT0400
System Overview
Page 2-2 15 December 2010 Issue 1.4
2.1 General Description
The 4100U-S1 is a pre-packaged configuration of the well-established 4100U fire alarm
system. It is aimed at smaller applications requiring one to four loops of Simplex
addressable devices with status and control for up to 64 zones.
The 4100U-S1 is available from stock, along with a range of expansion cards and modules,
making the 4100U-S1 an off the shelf solution.
4100U-S1 retains the standard 4100U features, such as: enhanced CPU with dual
configuration programs, convenient service port access, and module level earth fault search
to locate and isolate faults to assist installation and service. It is fully compatible with all
existing 4100U networks and modules.
Note:
Larger or more complex 4100U systems are custom configured and constructed, using a
range of cabinet sizes and multiple cabinets if needed. While this manual does not cover the
many customization options, the programming principles remain the same and 4100U-S1
program templates can be used as a starting point for large systems.
To Next Page
Loading...
Need help?
General
