4100U-S1 Programming Guide Document: LT0400
Building and Downloading the Configuration
Page 11-6 15 December 2010 Issue 1.4
11.7 Sending 4100U files to Simplex.
If you need to send an existing (on your PC) 4100U config to Simplex, the best solution is to
zip up the entire folder. The folder can normally be found under C:\4100Ujobs\.
If you have uploaded a config from a 4100U Panel, it must be sent to Simplex, so it can be
de-compiled into an editable format. After conversion, Simplex will send you the editable
files. As with the case above, the best solution is to zip up the entire folder. The folder can
normally be found under C:\4100Ujobs\.
To Next Page
Loading...
Need help?
General
