Simplicity LEGACY Series

Questions and Answers

D
Denise MartinSep 13, 2025
What causes Incorrect Fuel Level Indication in Simplicity LEGACY Lawn Mower (All Models)?
- A
  Angela LeonardSep 13, 2025
  Incorrect fuel level indication in your Simplicity Lawn Mower might be due to loose, broken, or dirty connectors or wiring; if so, replace or repair the damaged wires or connectors. Another cause could be a loose, broken, or dirty ground connection, requiring you to replace or repair the damaged ground connection. Additionally, a malfunctioning fuel gauge may be the problem, necessitating wiring or instrument panel repair. Finally, a malfunctioning fuel level sensor could be the culprit, so repair or replace the fuel level sensor.
W
Wayne JohnsonSep 15, 2025
What causes Accessory or Mower Deck to not operate in Simplicity LEGACY?
- A
  Anthony TerrySep 15, 2025
  If an accessory or mower deck isn't operating on your Simplicity Lawn Mower, it could be due to a few reasons: the accessory might be jammed or bound, which requires correcting the problem; the accessory power connector might have loose or broken wires, which requires repairing the broken wire or connector; or the accessory (height of cut) switch might be worn or failed, which requires replacing the height of cut switch.
B
Benjamin GarrettNov 17, 2025
Why Simplicity Lawn Mower engine will not turn over?
- S
  sean36Nov 18, 2025
  If your Simplicity Lawn Mower engine won't turn over, several issues could be the cause. It might be due to loose, broken, or dirty connectors or wiring, which would require you to replace or repair the damaged wires or connectors. A loose, broken, or dirty ground connection could also be the culprit, necessitating replacement or repair of the ground connection. Additionally, check for dirty or loose battery connections, a worn battery (replace or repair battery cables or replace the battery), a dead battery (charge or replace it), a circuit breaker malfunction (replace the circuit breaker), a worn or malfunctioning ignition switch (replace the ignition switch), a worn or failed PTO switch (replace the PTO switch), a worn or malfunctioning brake pedal switch (replace the brake pedal switch...

Simplicity LEGACY Series Specifications

General

Engine Brand	Briggs & Stratton
Transmission	Hydrostatic
Deck Type	Fabricated
Cruise Control	Yes
Cutting Width	52 in.
Turning Radius	18 inches
Cutting Height	1.5 - 4.5 in.
Deck Material	Steel
Warranty	3 years