Simrad GC80/85 Compact MK2 Gyro Compass
988-12718-003 36
8 Tilt the Horizontal ring to the side where the plug is located, and
carefully put the Sensitive element into the ring.
- The socket on the Sensitive element should be located
right above the plug attached to the Horizontal ring.
9 Position the Sensitive element on the Horizontal ring by putting the
assembly jigs into the holes as indicated in the figure below.
Observe the rings on the jigs to ensure proper positioning. Insert
and fasten the 2 screws in the other holes.
To Next Page
Loading...
